search

Pro-Built Tools PB1200 Series Manual de instalación Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
GTO 4000XL Instruction Manual © 091610 17
Set Auto Close Time
The Auto-Close Time potentiometer
controls the Auto-Close feature, and
determines how long the gate will
remain open (at the fully open position)
before it begins to close. The settings
for this feature are OFF, or from 3 to 120
seconds.
Adjust the Auto-Close potientiometer
byusingasmallatbladescrewdriver.
Program Your Personal
Transmitter Setting
All GTO transmitters are set to a standard code at the factory
and are ready to operate your gate operator. For your safety
and security, we strongly recommend that you replace the
factory setting with your own personal setting. Follow the
directions below:
NOTE: If you have multiple transmitters, you should adjust
all of them at this time. [RB741/RB742/RB743].
Step 1
Use a small phillips head screw driver to remove the
transmitter cover.
Step 2.
Set the transmitter DIP switches using a small screwdriver.
There are nine (9) transmitter DIP switches; each can be
placedinthreedierentpositions(+,0,–).DO NOT set all the
switchesinthesameposition,suchasall+,all0,orall–.Once
the DIP switches have been reset, replace and close the access
cover.
WARNING: No other adjustments should be made inside the
transmitter.
Step 3.
Program the new setting into the control board:
A. Press and hold transmitter button.
B. Press and hold the LEARN RMT (Learn Remote) button
on the control board until the alarm sounds.
C. Release transmitter button. The new code is stored in
control board memory.
D. Release the LEARN RMT (Learn Remote) button.
NOTE: If you have purchased additional transmitters, program
the settings for all at this time.
NOW TEST RECEIVER BEFORE PERMANENTLY MOUNTING
IT (See page 11).
1 2 3 4
ON DIP
STATUS
LEARN RMT
LEARN
MAST LIMIT
LEARN
2ND LIMIT
S3
S4
S2
OFF
SOFT START OFF
WARNING OFF
OPEN PULL
2ND OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN MAX
AUTO CLOSE TIME STALL FORCE
1 2 3 4
ON DIP
STATUS
LEARN RMT
LEARN
MAST LIMIT
LEARN
2ND LIMIT
S3
S4
S2
SOFT START OFF
WARNING OFF
OPEN PULL
2ND OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN MAX
120 MIN MAX
120 MIN MAX
120 MIN MAX
120 MIN MAX
120 MIN MAX
AUTO CLOSE TIME STALL FORCE
AUTO CLOSE TIME STALL FORCE
Auto Close Time
Potentiometer
+
0
ECE
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
ECE
A23S 12V
ALKALINE BATTERY
+
0
–
LED
1 2 3 4
ON DIP
STATUS
LEARN RMT
LEARN
MAST LIMIT
LEARN
2ND LIMIT
S3
S4
S2
SOFT START OFF
WARNING OFF
OPEN PULL
SLV OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN MAX
AUTO CLOSE TIME STALL FORCE
Learn Remote
Button
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Comentarios a estos manuales

Sin comentarios
  • Ziplevel Vision Drive Esco Dunham-Bush Favi Entertainment
  • Crosley Teléfonos Dymo Paneles de las bahías de unidades Hotpoint Secadoras KitchenAid No KitchenAid No
  • LG DP132 Chauvet SM-80 Canon MV920 Samsung BD-H5900 Logitech 920-000919
  • Nokia Lumia 925 Manual de usuario Raymarine RD424D Manual de usuario Samsung SGH-X700 Manual de usuario Philips HTS3251/12 Manual de usuario Samsung S24D391HL Manual de usuario